New product

Specification :

Model MX.32.4 Pro Live Mixers
Input impedance Mic 2 kOhm Balanced
Line 10 kOhm Balanced
Input gain Mic continuosly variable from 0dB to +50dB
Line-Mono Channel continuosly variable from -15dB to +35dB
Line-Stereo Channel continuosly variable from -20dB to +20dB
Maximum input level Mic +22dBu
Line (Mono Channel) +22dBu
Line (Stereo Channel) +22dBu
Insert send impedance 120 ohm Unbalanced
Insert send Level/Max -10dBu/ +22dBu
Insert return impedance 10 kOhm Unbalanced
Insert return Level/Max -10dBu/ +22dBu
CMR at 1 kHz Line (20Hz-20kHz) >60dB
Frequency response Mic to Mix 20Hz-20kHz +/-3dB
Signal/Noise Ratio (20Hz-20kHz) Mic EIN ref. 150 Ohms -117dBu
System Noise (20Hz-20kHz)
Summing Noise -90dBu (24 channels routed with faders down)
Line to Mix Noise -86dBu (24 channels routed at 0dB, pan center)
Distortion at 1 kHz Mic to insert (+30dB unity gain, +20dBu output (<0.009%)
Mix to Mix (+30dB unity gain, +20dBu output) Type 0.03%
Crosstalk at 1 kHz Channel to channel >-80dB
Mix to Mix >-80dB
Channel to Mix >-80dB
Fader Attenuation >100dB
Output (nominal signal level mic -50dBu to 0dBu - Line 0dBu)
Output impedance All line outputs 120 Ohm Balanced
Insert send impedance 120 Ohm Unbalanced
Insert send level/Max +22dBu
Insert return impedance 10 kOhm Unbalanced
Insert return level/max +22dBu
Maximum output level master outputs on XLR +28dBu
All outputs on 1/4" jacks +22dBu
Headphones +22dBu / 600 Ohm
Main Mix Section
Hi-Shelving +/-15dB @ 12kHz
MIS HI-bell (STEREO) +/-12dB @ 3kHz
MID-bell (MONO) +/-12dB frequency range 100Hz - 8kHz
MID LOW-bell (STEREO) +/-12dB @ 500Hz
Bass-shelving +/-15dB @ 80Hz
Hi Pass Filter Slope -18dB/Oct. @ 75Hz
Power Supply
USA / Canada 100-120 VAC - 60Hz
Europe 210-240 VAC - 50Hz
U.K. / Australia 240 VAC - 50Hz
Dimensions 107.8 x 61.8 x 26.6cm
Weight 22.5kg

Belum ada review dari pelanggan.

Tulis komentar Anda



Produk yang pernah dilihat

30 other products in the same category

30 produk lainnya dikategori yang sama: