Specification :
| Model | TPM4200FX MKII | |
| Input Channels | Microphone input | Electronically Balanced, Discrete Input |
| Frequency Response | 12Hz to 55kHz, +/-3dB | |
| Gain | 45dB | |
| Line Input | Electronically balanced | |
| SNR (signal tp noise ratio) | >75dB | |
| Gain | 45dB | |
| Impedance | Microphone Input | 1.5kOhm |
| All other input | 10kOhm or greater | |
| Tape Out | 1kOhm | |
| All other output | 120Ohm | |
| THD | 0.5% at 10dB Below rated Output Power | |
| Equalization | Hi shelving | +/-15dB@10kHz |
| Low shelving | +/-15dB@100Hz | |
| Graphic EQ | 7-band, 4/3 octave | |
| DSP section | A/D and D/A converters | 24 bits |
| DSP resolution | 24 bits | |
| Type of effects | Echo, Echo+Verb, Tremolo, Plate, Chorus, Vocal, Rotary, Small Room, Flanger+Verb and Large Hall | |
| Presets | 100 | |
| Controls | 100-position PRESET selector, CLIP LED,MUTE SWITCH with LED indicator | |
| Main Mix Section | Noise (Bus noise) | Fader 0dB, channels muted: -85dBr (ref: L+4dBu) |
| Fader 0dB,all input channels assigned and set | ||
| to UNITY gain: -81dBr (ref: +4dBu) | ||
| Monitor Max Out | +22 dBu unbalanced, 1/4'jack | |
| FX sends max out | +22 dBu unbalanced, 1/4'jack | |
| Power Amplifier Section | Output power | 2 x 100W RMS at 1kHz,THD=1%,Load=4Ohm |
| Frequency Response | 20Hz to 22kHz,+/-3dB | |
| Power Source | 115 Volts 60Hz - 230 Volts 50Hz Switchable | |
| Physical | Dimensions | 466*280*191mm |
| Net Weight | 7.8Kg | |
Belum ada review dari pelanggan.
Produk yang pernah dilihat
FOLLOW US
Gabung dengan Sosial Media kami untuk mendapatkan info terbaru.