New product

Specification :

Model MX.3
Frequency Response Mic Input to any Output 10 Hz to 40 kHz(0, -1dB)
(Gain @ 0 dB, Rated output level) 10 Hz to 400 kHz(0, -3dB)
Distortion (THD&N) Mic Input to MAIN Output(Gain @ 0 dB, Rated output level @ 20 Hz-20 kHz bandwidth) 0.01% (A-weighted)
MIC EIN (Equivalent Input Noise) Input: Channel INPUT MIC (Rs = 150 Ohm Gain @ Max.,20 Hz-20 kHz bandwidth) -118dBu (A-weighted)
CMRR Mic in to main out(Gain @ Max.,@ 1 kHz)70dB 70dB
Input Gain (20 Hz-20 kHz) Mono Channel MIC: 0 to 48dB, LINE: -35 to +15dB
Stereo Channel --
Attenuation (Crosstalk) (20 Hz-20 kHz) Line in, 1/4" TRS Main Out,1 kHz relative to 0 dBu, 22 Hz ~ 22 kHz Filter, Gain @ unity.
Main Mix knob/fader @ -8 -79dBu (A-weighted)
Channel Level knob/fader @ -8 -79dBu (A-weighted)
Rated Output Level Main, Aux, Control Room output (all knob/fader @ 0 dBu,1 kHz) 0dBu
Maximum Output Level Main, Aux, Control Room output (all knob/fader@ 0 dBu,1 kHz, 22 Hz 22 kHz Filter,THD @ 1%) +17dBu
Maximum Voltage Gain (EQ and PAN/BAL knob@ 0 dB, Other all knob orfader @ max, DFX mute, 1 kHz, Rs=600 Ohm) Mono Channel MIC INPUT MAIN OUT (3.5mm jack stereo) 69dBu
Mono Channel MIC INPUT Monitor (3.5mm jack stereo) 78dBu
Mono Channel MIC INPUT TAPE OUT (RCA) 69dBu
Mono Channel LINE INPUT MAIN OUT (3.5mm jack stereo) 53dBu
Stereo Channel LINE INPUT MAIN OUT (3.5mm jack stereo) 16dBu
TAPE INPUT MAIN OUT (3.5mm jack stereo) 6dBu
TAPE INPUT Monitor (3.5mm jack stereo) 9dBu
Main mix Noise (20 Hz-20 kHz bandwidth) MAIN OUT (all knob/fader @ 0 dBu, 22 Hz-22 kHz Filter,Gain @ unity)
Main Mix knob/fader @ -8 ,Channel Level knob/fader @ -8 -120dBu (A-weighted)
Main Mix knob/fader @ 0dB, Channel Level knob/fader @ -8 -100Bu (A-weighted)
Main Mix knob/fader @ 0dB, Channel Level knob/fader @ 0dB -98dBu (A-weighted)
Equalization (Mono channels) Stereo Channels
High +/-15 dB @12 kHz High +/-15 dB @12 kHz
Low +/-15 dB @80 Hz Low +/-15 dB @80 Hz
PEAK Indicator Channel 1 Channel 2
VU Meters Main Left and Right (1-segment) Clip +15dBu
Impedance Microphone Input 2.6k Ohms
Line Input 10k Ohms
Tape Input 10k Ohms
Main Outputs 120 Ohms
Phones Output 120 Ohms
Tape Output 1K Ohms
USB SECTION USB Interface USB 2.0 full speed compliant
ADC & DAC 16-Bit Delta-Sigma,44.1kHz Sampling Rates
Operating System Windows 2000,XP or higher, Mac OS 9.0.4 or higher, 10.Xor higher
Phantom power Mic Pin2/Pin3 And Pin1(XLR-3-31 type balanced 1=GND, 2=HOT, 3=COLD) +20V
Power supply Adaptor DC5V, 500mA
USB Connection DC5V, 500mA
Power Consumption 2.5W
Physical Dimension (L*W*H) 98 mm*136 mm*34 mm
Weight 0.48Kg (1.1 lbs)

Belum ada review dari pelanggan.

Tulis komentar Anda



Produk yang pernah dilihat

30 other products in the same category

30 produk lainnya dikategori yang sama: