[ Tel : +62 81 3386 48844 ] Senin - Sabtu:8:30 - 17:30
[email protected]

YAMAHA - XMV8140-D

Condition: New product

Manufacturer: Yamaha

Main Features :

*	High impedance and low impedance … or both
*	New “Double Power Mode”
*	Selectable input formats for a wider range of applications
*	A perfect match for the MTX Series
*	Best installation amp ever?
*	Protection features for more reliable operation
*	External control via Ethernet

Specification :

Output Power	1kHz, THD+N = 1% (20 ms Burst)	4Ω	140W x 8
		8Ω	140W x 8
		4Ω/ Double Power Mode	280W x 4
		8Ω/ Double Power Mode	280W x 4
	High impedance	100V line	125W x 8 / 80 Ω
		70V line	125W x 8 / 40 Ω
Voltage Gain	RL=8Ω		28.7dB
	RL=8Ω / Double Power Mode		31.7dB
	100V		38.2dB
	70V		35.2dB
Input Sensitivity	RL=8Ω
S/N Ratio	A-weighted
Power Consumption	1/8 power (4 Ω pink noise)		250W
	Idle (4 Ω)		73W
	Standby		23W
THD+N	1kHz, half power		≤ 0.2%
Frequency Response	RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz		0dB, ±1.0dB
Crosstalk	1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt		≤ -60dB
Maximum Input Level			+24dBu
Input Impedance			20kΩ (balanced), 10k Ω (unbalanced)
Connectors	Analog Input		Euroblock x 2 (6P, balanced)
	Digital Input / Output		RJ45 x 2 (YDIF IN / OUT)
	Speaker Output		Barrier strip x 8 pairs
	Network		RJ45 x 1
	Remote, Fault Output		Euroblock (3P) x 1
	AC IN		AC Inlet x 1
Protection circuit	Load Protection		POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
	Amplifier Protection		Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically),
			Low load impedance: Output mute (Restored automatically)
	Power Supply Protection		Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) ,
			Integrated power: Gain reduction (Restored automatically)
Cooling Fan			3-Speed fan x 2, front-to-back airflow
Power Requirements			100V, 120V, 230V-240V; 50Hz/60Hz
Dimensions	W		480mm (18.9")
	H		88mm (3.5")
	D		422mm (16.6")
Weight			10.1kg (22.3lbs)